47
Operation of the System
Multiple Products
The EMR
3
is capable of delivering multiple products through the same meter. If more than one product is set up in
the setup menu, when the START button is depressed, the multiple product selection is initiated and the first
product is displayed. Press the
button to sequence through the products and press the ENTER button to
select the product.
Single Deliveries
The operator presses the START button. The display will show All Segments (see Figure 3 on page 5) and then All
Zeros displays (see Figure 4 on page 5). The operator may then deliver product to the tank.
Multiple Deliveries
The EMR
3
is capable of delivery to multiple tanks through the same meter. The operator presses the START button
until the Multiple Delivery Icon appears in the display and releases it. The display will show All Segments (see
Figure 3 on page 5) and then All Zeros displays (see Figure 4 on page 5). The operator may then deliver product
to the first of multiple tanks. The product selection and preset methods used in the dispensing on a single delivery
would apply. Upon completion of the first of the deliveries the START button is pressed to indicate that the
delivery to the tank is complete and you are ready to fill the next tank. After all the tanks are full, the FINISH button
concludes the transaction and a summary printout is initiated.
Transfer Deliveries
The EMR
3
is capable of delivery between compartments without printing a delivery ticket. This delivery type
requires that a transfer switch is wired to the Display Head and that Transfer Deliveries is enabled in Delivery
Options Setup.
The operator turns On the Transfer Switch and presses START to begin the delivery. After dispensing the desired
amount, the operator presses FINISH to complete the delivery and printout a Transfer Delivery ticket. The operator
turns Off the Transfer Switch.
Multiple Products in Multiple Deliveries
The EMR
3
is capable of delivery to multiple tanks through the same meter during a multiple delivery. When the
START button is depressed and held down the Multiple Delivery state is evoked and the Multiple Delivery Icon is
activated. If the user has setup more than one product the multiple product selection is initiated and the select
product message is displayed. If a priced delivery is desired the first product utilizes that price and the operator
may then deliver product to the first of multiple tanks. Upon completion of that delivery the START button is
depressed and the product selection is reinitiated but flow is not allowed. If a product other than the one
previously selected is selected then the user may enter a price in the same way as in pre-delivery. The user then
may dispense that product. During the product selection sequence the user may select products but only one
price per product is allowed. Therefore the subsequent delivery of product in a multiple delivery is always delivered
at the same price. The multiple delivery transaction is concluded in the same way as a multiple delivery with the
itemized printout with each product subtotaled.
Driver Selection of Price/with Tax Codes During Operation
The display head is capable of accepting a Price, Discount with an associated Tax Code by the means described
in this section.
