EMR
3
Setup and Operation Manual
Entry of Price Codes & Tax/Discount Assignment in Setup Mode
48
In the Currency Mode the system defaults to the price prompt. At the price screen the price is displayed in its net
value in the Preset Field. The selection of a new price is accomplished by simply pressing the NEXT button. The
price, whether it is the default price previously entered, is displayed in the change price screen with its base value
in the preset field and its net value in the register field. The price code is changed by, accepting the Price
(pressing the ENTER button) or scrolling to the appropriate price code and accepting (pressing the ENTER
button). Alternatively, prior to accepting the price from the two methods described, from the Change Preset screen
the NEXT button may be pressed to "write over" the base value in the Preset Field. The new Value is accepted by
pressing the ENTER button. After entering the price code, the operator can continue with the delivery. The price
code can be changed after START button is pressed except in multiple delivery state after the first dispense of
product.
Entry of Price Codes & Tax/Discount Assignment in Setup Mode
The display head is capable of accepting default price and discount & tax entered by the operator between
deliveries through the Setup Mode. The price default codes are accessed through the pricing setup screen by
pressing the NEXT button to navigate to the Price Code 1 screen. The user then selects the price code that they
wish to enter by scrolling to the code of choice. From that chosen price code, the NEXT button is pressed to
advance to the change price screen. The price is altered by pressing the NEXT button to navigate to the screen to
enter the base price. The price input is accomplished by pressing the NEXT button, scrolling to the desired price,
and pressing the ENTER button to accept. The new price is then assigned a Tax Code by pressing the - button to
Assign Tax/Discount screen. From this screen the NEXT button navigates to the Assignment screen and scrolling
to the appropriate Tax/Discount code, assigned by using the ENTER button. When the user returns to price and
navigates to the Tax/ Discount code assignment, T/D Code 1 is displayed
Emergency Stop
The EMR
3
has an optional Emergency Stop Switch (ESS) that may be mounted remote to the system. When the
Operator activates the ESS, the Emergency Stop Icon displays, the relay contacts are opened, and the system is
shut down. To resume delivery, the operator must pull out the switch.
Preset Operation and Tank Topping
The Preset operates in a specific manner in the EMR
3
. Whether the display is set in Volume or Currency Mode, the
Preset is actually counting volume in the background. This is to say changing the value of the preset in Currency
Mode, in currency, changes the equivalent volume preset level in the background. The result is the operator may
change the preset in either mode in the denomination of that mode with the same result. They can also switch
between modes without altering the preset level.
The preset display shows the countdown from the preset level. While doing so, the fuel volume is compared to the
Preset value. When the amount dispensed reaches the designated slow point, flow control relay 1 opens and the
register displays a slower dispense rate. When the amount dispensed then reaches the designated stop point,
flow control relay 2 opens and shuts off flow at the delivery’s preset value.
The user can disable the preset during the operation of the unit by pressing the PRESET button to go to the
Preset Countdown, selecting disable, and pressing the ENTER Button. Conversely the user may enable the Preset
by pressing the PRESET button then pressing ENTER.
The display indicates the Preset is enabled by turning solid the Icon directly to the left of the Preset Field.
Alternatively, when the preset is disabled, the same Icon Flashes.
This methodology allows the topping of tanks by setting the preset and dispensing product until the system turns
off the flow. At that point if the operator wishes to dispense more product they could disable the preset or set a
new Preset, then dispense the desired additional product. When the preset is disabled, the preset display counts
past 0 to a negative amount equivalent to the difference between the preset level and the register reading.
