Vedeneyev M-14P, Maintenance Manual

Page: 62 / 381

75
TO M-14P M.S. TASK CARD No. 212
MS ITEM
072.00.00b, 0'77.00.00c Procedure: Visual External Inspection of Engine and Leakage Check of Engine Assembly and Accessory Joints
OPERATIONS AND TECHNICAL REQUIREMENTS
CORRECTIVE
ACTIONS
CHECKED
BY
1. Check the engine for external condition and tightness of joints of assemblies and
accessories.
T.R. leakage of fuel and oil through joints of assemblies and accessories is not allowed.
Damaged locking, loosened attachment are not allowed.
NOTE:
Tighten nuts for attachment of the gearbox to the intermediate crankcase by torque
wrench 14-024-260 with socket 14-324-06. Tightening torque M
t
= (1.5
+0,3
) kgf-m. At locations of
the oil sump bellows, boss of the passage for supply of oil to the R-2, series 04, speed governor,
boss for the R-2, series 04i governor attachment and boss for the centrifuge (on engines M-14P,
series 2) where torque wrench cannot be used, tighten the nuts with the wrench
.
Detect and eliminate
cause of fuel and oil leakage
Tighten nuts and replace locking
TEST EQUIPMENT TOOLS AND FIXTURES MATERIALS
Wrench, torque 14-024-260
Socket set
Wrench 700002