Vedeneyev M-14P, Maintenance Manual

Page: 322 / 381

TO M-14P MS
TASK CARD No. 202
M S ITEM
PROCEDURE
Depreservation of Kew Compressor
OPERATIONS AND TECHNICAL REQUIREMENTS CORRECTIVE ACTIONS
CHECKED
BY
1.move the new compressor from its packaging. 2. Remove the blanking cover from the
delivery valve.
3. Remove the spring lock, mesh, filtering element and the aecond mean.
4. '.Vine the outer surfaces and flange of the compressor with a clean cloth moistened, in
clean unleaded gasoline.
5. Press the stem of the inlet valve with hand. and turn the compressor eccentric 15 to 17
full revolutions to remove preservation grease from the cylinder Interior.
6. Wash the filtering element with gasoline and dry with compressed air.
7. Install the mesh, filtering element, second mean and lock with the spring lock.
NTES: 1. Install the filtering element inside the filter housing with the same surface
inward as it was before washing.
2, Install the filter lock with the convex middle portion -toward-s the mesh.