VDO X2DW, Instruction Manual

Page: 175 / 336

X2DW VDO CYCLECOMPUTING 18
GB SLO PL JP JP PL SLO GB
www.vdocyclecomputing.com X2DW 19
Set navigator back to zero:
Using go to NAVIGATOR/
SELECT. Confirm with
M .
NAVIGATOR/SET
Using switch to
NAVIGATOR/RESET.
Confirm with
M .
Security question: NAVIGATOR/RESET?
Confirm with
M .
NAVIGATOR/SET DONE appears briefly and your
VDO computer automatically returns to the NAVI-
GATOR/SELECT start menu.
Select NAVIGATOR/FORWARD or
NAVIGATOR/BACKWARD using
. Confirm with M .
NAVIGATOR SET DISTANCE/
CONTINUE. The flashing digit
is ready to be set. Using
set the digits. Access next digit
with
M . Repeat steps until last
digit is flashing. Confirm with M .
NAVIGATOR/SET OK? Confirm with M .
NAVIGATOR/SET DONE appears as confirmation
and your VDO computer automatically returns to
the NAVIGATOR/SELECT menu.
Note: The navigator always runs automatically
at the same time, even if you have not set it.
Sleep mode 1 switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode 1 is ended when speed impulses are
processed again (when cycling) or a button is
pressed.
In Sleep mode 2 the wireless receiver is also
switched off. (after 15 min).
5.8 Sleep mode
Your VDO computer is equipped with a two-fold
sleep mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time, service interval
display and the -symbol (if the stopwatch is
running) continue to be displayed.
The display shows SLEEP
MODE/PRESS BUTTON
Before continuing to ride, you
must press a button to switch
the receiver back on.
Using go to DATA RESET/
SELECT. Confirm with
M .
Use to go to the data you
want to reset:
B
DATA RESET/TOUR DATA
B
DATA RESET/TOT RIDE TM
B
DATA RESET/ODO TOTAL
B
DATA RESET/NAVIGATOR
Confirm your selection with M .
Query: SELECTED DATA/RESET?
ATTENTION: This step cannot be reversed.
Only confirm with M , if you want to delete the
selected data. The display confirms: DATA RESET/
RESET DONE. Automatic return to SETTINGS/SELECT.
You use the RESET function to set any of these back
B
TOUR DATA
B
ODO TOTAL
B
TOT RIDE TM
B
NAVIGATOR
With the respective reset modes, the following
information is deleted:
B
TOUR DATA: Day‘s tripdistance, ride time,
average speed, max. speed, cadence (option)
B
ODO TOTAL: Total km, km bike 1, km bike 2
B
TOTAL RIDE TM: Total ride time, ride time bike 1,
ride time bike 2.
B
NAVIGATOR: all values from the second
distance counter.
Using go to SETTINGS/
SELECT. Confirm with
M .
You are now in setting mode
(pressing
C for 3 seconds gets
you back to function mode).
5.9 Reset functions
The display for the speed and
the cadence flashes.
The computer now waits for speed and cadence
signals (as long as cadence is installed). Simply set
off riding now. The computer acquires the digital
encodings from the transmitter.