Split-screen display
(combined display)
The two split-screen displays combine the
map display on the left side with the symbol
or the trip-computer display on the right.
✎
The menu options for the split-screen
display are the same as for the map
display.
✎
In this display type, the “Traffic view”
menu option is not available.
✎
The data in the trip computer is deleted
automatically when a new destination is
entered.
■
Status lines
At the upper and lower edges of the screen,
two status lines are displayed, which show a
variety of information for navigating and
about the system status.
Much of the displayed information can be se-
lected for display in the “Settings –> Screen
config.” menu.
The top left status line shows the menu title
of the active menu. The “Status line top left”
can be configured for the navigation screens.
Refer to the “Settings” section, page 21.
In the lower status line, you can find the fol-
lowing symbols which are not configurable:
❑
5
Ù
: Display of the GPS reception status
(number of satellites).
❑
Ú
: The dynamic route planning is acti-
vated/deactivated.
❑
l
: The audible navigation messages are
deactivated (flashing in the position of
the
Ú
symbol).
❑
t
: Selected route criterion for the route
planning (in this case, “Fast”).
OPERATION
SETUP
INSTALLATION
CONTENTS
14
