If you have activated the automatic mode,
the system automatically plans the route so
that you are guided extensively around the
road obstructions without the system issuing
a message.
During guidance, the system checks continu-
ously on the basis of the traffic information
whether there is a better route for route
guidance and a new route is sometimes cal-
culated, for example, if a traffic jam has dis-
appeared.
Depending on the setting in the dynamic
route planning, there are two different types
of detour:
■
Extensive detour
(with activated DRP only)
As soon as the navigation system has received
information about one or more traffic ob-
structions via RDS-TMC that would mean a
relatively long delay for navigation to your
destination, the system offers you the option
well in advance of detouring the traffic ob-
structions extensively.
✎
The criteria that influence a new planning
of the route (re-routing level, traffic ho-
rizon and entire delay) can be set under
“Settings –> Dynamic route”.
✎
It is possible to replan the route manually
at any time in light of the current traffic
situation with the “Plan new route”
menu item on the guidance screen.
■
Local detour
(with deactivated DRP only)
With the local detour, it is possible to bypass
the next traffic obstruction ahead which is
announced by TMC.
As soon as you have arrived up to approx.
50 km from the road obstruction, you will
receive an appropriate message.
✎
With the “Local detour” menu item on
the guidance screen, you can bypass the
imminent road obstruction if required.
■
Activating dynamic route planning
☞
Select “Info” in the Start menu.
☞
Select “Route criteria” in the Info menu.
☞
Activate “Dynamic route”.
☞
Select “Return” to save the setting.
Via points
If you wish to visit other locations en route
to the entered destination address, these can
be stored as via points. The navigation system
then plans the route to include the via points
in the given sequence before the destination
address is reached.
■
Entering via points
☞
Select “Via points” in the navigation
menu.
✔
The “Via points” menu is displayed.
☞
Enter the via points as described under
Destination input.
In the “Via points” menu, the following op-
tions are also available:
❑
Store via point:
Stores the currently en-
tered via point.
❑
List via points:
Displays the list of previ-
ously entered via points.
❑
Delete via point:
Deletes via points from
the list of via points.
OPERATION
SETUP
INSTALLATION
CONTENTS
18
