Map display
The map display shows the following infor-
mation:
1
Selected scale.
2
Planned route (shown in white).
3
Compass: The black arrow points north.
4
Distance to the next change of direction.
5
Simplified diagram of the driving direc-
tion, the next junction or crossing.
6
Vehicle position; the arrow indicates
current steer direction.
■
Menu options in the map display
☞
Press the
OK
button to display a pop-up
menu with the following options:
❑
Return:
Returns to the Navigation or
Start menu.
❑
Scale
: Opens the window for adjusting
the scale.
❑
Map mode:
Switches the map display
(“Northwards”, “Steer direction”,
“2D/3D” and 3D angle).
✎
The display type “Steer direction” is not
available in the scales 50 km to 1,000 km.
✎
The display type “3D” is not available in
the scales 50 km to 1,000 km and is
always given in direction of travel.
❑
Info:
Opens the Info menu.
❑
Stop guidance:
Stops guidance.
❑
Traffic view
: Activates the cursor for the
selection of TMC symbols on the map.
See “TMC traffic information” section.
✎
The option “Traffic view” is only avail-
able in the “2D/Northwards” map
mode.
❑
Local detour:
Upon request, plans a de-
tour if there is a road obstruction in less
than 50 km on the planned route.
This option is only displayed if dynamic
route planning is deactivated and TMC
traffic information is activated. See
“Dynamic route planning”, page 17
and “Settings –> Message selection”,
page 21.
❑
Plan new route:
Upon request, plans a
new route in light of the current traffic
situation. This option is only displayed if
dynamic route planning is activated. See
“Dynamic route planning”, page 17.
OPERATION
SETUP
INSTALLATION
CONTENTS
13
