■
Shutdown delay time
Immediately after switching off the ignition,
the monitor is deactivated, but the naviga-
tion computer remains active for a period
that can be set. This has the advantage that
you can continue the directional guidance
after a short stop (e.g. at the petrol station),
without the navigation computer having to
calculate the route again.
The shutdown delay time can be set be-
tween 1 and 10 minutes in the “Settings –>
General settings –> Shut-down timer” menu.
Volume adjustment
You can set the volume of the audible guid-
ance messages as follows:
☞
Press the
V
button once or several times
to increase the volume of the audible
messages.
☞
Press the
W
button once or several times
to decrease the volume of the audible
messages.
Start Menu
The Start Menu appears after you have con-
firmed the user instruction.
In the Start Menu, the following menu options
are available:
❑
Navigation:
Calls up the main navigation
menu (e.g. for destination input, guid-
ance, address book, etc.).
❑
Map:
Calls up the previously selected
guidance screen.
❑
Travel info:
Calls up the menu with the
available travel information products (e.g.
travel guide, restaurant and hotel
guide).
❑
Info:
Calls up the Info menu with TMC
traffic information.
Other information relating to the cur-
rent route is also available.
❑
Trip computer:
Calls up the trip computer
display with the trip data and the current
GPS position.
❑
Settings:
For the individual adjustment
of the navigation system.
❑
TV/Video*:
Switches to the connected
TV/video source (e.g. TV tuner).
❑
Stand-by:
Switches the system into
stand-by mode.
Press one of the cursor buttons
4
,
6
,
8
,
2
or the
OK
button on the remote con-
trol to activate the system again.
* Only available if the option has been
activated in the Settings menu.
9
OPERATION
SETUP
INSTALLATION
CONTENTS
