Mounting the computer
1. Connect the GPS antenna to the “GPS”
socket and the TMC antenna (accessory)
to the “TMC” socket.
2. Connect the power supply cable to the
ISO socket A’ of the navigation computer.
3. If used: Connect the signal cable to the
ISO socket B’ of the navigation computer.
4. Connect the monitor cable to the moni-
tor socket D’ of the navigation computer.
Initial operation
1. Reconnect the battery.
2. Insert SD card with the map data into
one of the computer’s SD card slots.
3. Insert batteries in the remote control
battery compartment.
If an active holder (accessory) is being
used for the remote control, in the
holder the remote control also works
without batteries.
4. Park the vehicle outdoors to ensure un-
impeded GPS reception.
5. Switch on the ignition.
The LED on the navigation computer
must light up.
The screen display appears (information
on the safe use of the system).
6. Confirm the user information using the
OK
button on the remote control.
The main menu appears.
7. Wait for a few minutes with the ignition
switched on until the navigation system
has adequate GPS reception.
The integrated GPS receiver requires
approx. 2 - 10 minutes following the first
start-up to receive the system time and
to calculate an adequately accurate GPS
position.
Adapting the system
☞
Select “Settings –> System Information
–> Diagnosis –> Code” (see also operat-
ing instructions).
☞
Enter the code “6330”.
✎
You can now perform the necessary ad-
aptation of the navigation computer to
the installation position and configura-
tion of the overall system.
■
Display adaptation
☞
Select “Screen format”, and set the navi-
gation computer to the relevant monitor
type (4:3 or 16:9).
■
Setting the language for the display
text and voice messages
A description on loading languages can be
found in the section entitled “Settings” in
the detailed operating instructions on the
DVD-ROM supplied.
■
Adjusting the installation position
When the computer is installed overhead:
☞
Select “Installation position” and activate
the corresponding option.
30
OPERATION
SETUP
INSTALLATION
CONTENTS
