K6/K6N Vacuum Packaging Machine
Safety, warranty
2002-04-25
Art. no. 519.340
Page 8/5 6
§
Following electrical installation or servicing, test the safety measures (e.g. earthing resistance).
§
The machine must be operated in compliance with local safety and accident prevention regulations.
§
This Operating Manual represents part of the machine. It must be replaced immediately if it is
damaged or lost. For another copy, contact our Customer Service Department or an official customer
service centre.
2.1.1
Use as prescribed
There are two versions of the machine available :
§
machine without an inert gas system
K6 type
machine with an inert gas system
K6N type
Both versions of the machine are intended for vacuum packaging solid and liquid goods, mainly
foodstuffs such as meats, sausage, etc. However, they can also be used for non-food products (medical
devices, electrical and mechanical components).
IMPORTANT
Both of these machines can be dangerous if they are not used properly or as directed. In order
to ensure that the machines are used as prescribed, it is also important to comply with the
installation, operation and maintenance conditions specified by the manufacturer.
2.1.1.1 Machine without an inert gas system (K6 type)
The K6 machine is used for the products described above. It is not suitable for products which are
sensitive to pressure as they would be damaged by the vacuum and the tightly applied packaging
plastic.
2.1.1.2 Machine with an inert gas system (K6N type)
The K6N machine is used for the products described above.
Advantages of applying inert gas
§
This enables products which are sensitive to pressure to be packed without any risk of damage. The
products keep longer and maintain their natural colours.
DANGER
In line with international regulations, high-pressure gases may only be fed via a reducer valve!
DANGER
If you used nitrogen and/or carbon dioxide, it is imperative that the room is well ventilated!
