Creating a Channel Guide
Multi-Format STB Quick Start
27
Testing the Configuration
Once these files have been created and stored on the STB, and the encoder's / VOD content
is available, testing can be done.
To test the system:
1. Log into the STB using Telnet.
2. At the # prompt, type the following:
# gotourl file:///root/titanium/demo_page/kumat/vbrick/
home.htm?CXML=channel3.xml
This will load the new channel file. So in the above example,
channel3.xml
will go to the
third channel file (training recorded video) as shown above. Repeat this step to test
channel1.xml
and
channel2.xml
.
3. To go back to the default channel file which loads at power-up type:
#gotourl file:///root/titanium/demo_page/kumat/vbrick/home.htm
