Configuration is performed using the Internal
tab of the Channels menu within VBOX Setup software. CAN
signal parameters can be entered manually by the user or imported directly from a CAN database (.dbc) file if available.
Racelogic Vehicle CAN Database
Racelogic supplies a free, encrypted vehicle CAN database, giving the user the ability to log basic CAN data from a
large number of current vehicles from a broad selection of manufacturers.
All of the CAN database files for vehicles we have reverse engineered can be downloaded from
Please note to access these downloads you will need a username and password - to retrieve this, please
VB3i CAN Pass Through
It is possible to output channel data from the Racelogic CAN bus (i.e. Racelogic modules such as TC8) on the isolated
customer VCI bus. The user can configure output data (in VBOX Setup) using channels from the available channels
dropdown list, and configure the identifier as required.
Example application: Racelogic IMU connected to the Racelogic CAN bus to use IMU yaw rate for improved dual
antenna slip translation data. Same IMU data being transmitted from the customer VCI bus to be logged by third party
CAN logging equipment.
The VBOX3i can output up to 6 user configured CAN messages, and 12 CAN channels over the customer VCI bus.
Be aware of checking CAN pass through channel selection when re-entering VBOX Setup. If the VBOX has many
external CAN channels being logged, then the dropdown channel selection can re-adjust. When VBOX Setup is then
exited, the adjusted CAN channels will be applied.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_3i_Range/VBOX_3i_User_Guide_(All_Variants)/08_-
_VB3i_CAN
36