SER
• Flashing
yellow
indicates that there is incoming Serial traffic through this socket.
• Flashing
green
indicates that expected incoming CAN data has been decoded properly and is being logged.
BLUETOOTH
• V1 Bluetooth module - Flashing
blue
indicates Bluetooth is waiting for a connection.
V2 Bluetooth module – Flashing
blue
indicates Bluetooth is initialising coms with a Bluetooth device.
• Solid
blue
indicates the VBOX3i has a Bluetooth connection with another Bluetooth device.
CF
• Flashes
blue
when data is being written to the card.
LOG
• Solid
green
when the VBOX is capturing data to the CF card.
• Flashes
red
indicating current logging rate after ‘FUNC’ button press, fast for 100 Hz, slow for 20 Hz.
IMU (V2/V3/V4/V5 only)
• Solid
orange
indicates that IMU integration is enabled but no IMU is connected, or, the detected IMU is invalid.
When using an IMU04, ensure that it is: connected using an RLCAB119 to the 25-way D connector, is set to
Racelogic CAN mode, and is running the
.
• Flashing
orange
shows IMU is connected and integration initialisation is running. This will not complete until the
VB3i has had a satellite lock whilst stationary for 30 seconds.
• Flashing
green
indicates Initialisation complete – movement not yet detected.
• Solid
green
indicates movement detected – IMU integration working OK.
VB3i V1
When IMU Integration is enabled and the IMU is connected, the
satellite
LED will remain off to act as an indicator for
the IMU integration status. Only when the filter is initialised and movement is detected will the SAT LED return to its
normal operation.
The user will need to leave 1 minute after powering the VBOX on with the IMU connected before starting to move. This
occurs on every power up of the VBOX unit.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_3i_Range/VBOX_3i_User_Guide_(All_Variants)/04_-
_VB3i_LED_Indicators
21