manualshive.com logo in svg

Vauxhall 2009 Corsa, Owner'S Manual

The Vauxhall 2009 Corsa Owner's Manual is a comprehensive guide that equips owners with all the necessary information to efficiently operate their vehicle. Available for free download at manualshive.com, this manual provides detailed instructions and troubleshooting tips, ensuring a smooth and hassle-free driving experience.

Share
Download
background image

Vehicle care

137

Pull the release lever and return it to

its original position.

Lift the safety catch upwards and

open the bonnet.
Air intake 

3

 109.

Secure the bonnet support.

Closing

Before closing the bonnet, press the

support into the holder.
Lower the bonnet and allow it to drop

into the catch. Check that the bonnet

is engaged.

Engine oil

In vehicles fitted with engine oil level

monitoring, the engine oil level is

checked automatically, Vehicle

messages 

3

 80. It is advisable to

check the engine oil level manually

before embarking on a long journey.

Check with the vehicle on a level

surface. The engine must be at

operating temperature and switched

off for at least 5 minutes.
Pull out the dipstick, wipe it clean,

insert it to the stop on the handle, pull

out and read the engine oil level.
Insert dipstick to the stop on the

handle and make half a turn.

Different dipsticks are used

depending on engine variant.

Summary of Contents for 2009 Corsa




















































































































































































































Reviews:

No comments

Related manuals for 2009 Corsa

Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Cadillac 2004 ESCALADE Customer Convenience/Personalization Manual preview
2004 ESCALADE
Brand: Cadillac Pages: 20
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Oldsmobile 1998 Aurora Owner'S Manual preview
1998 Aurora
Brand: Oldsmobile Pages: 380

Brands by name

Popular brands

Load more brands