94
Lighting
High beam
To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.
Headlight flash
To activate the headlight flash, pull
lever.
Headlight range adjustment
Manual headlight range
adjustment
To adapt headlight range to the
vehicle load to prevent dazzling: Push
button ∆ or ∇ step-by-step until the
required setting is displayed on the
odometer display. The display shows
for 4 seconds when low beam is
switched on or every time the beam
range is changed, together with the
symbol
?
.
0 = Front seats occupied
1 = All seats occupied
2 = All seats occupied and load
compartment laden
3 = Driver's seat occupied and load
compartment laden
Headlights when driving
abroad
The asymmetrical headlight beam
extends visibility at the edge of the
road at the passenger side.
However, when driving in countries
where traffic drives on the opposite
side of the road, adjust the headlights
to prevent dazzling of oncoming
traffic.
Vehicles with halogen headlight
system
Have the headlights adjusted by
a workshop.
Summary of Contents for 2009 Corsa
