Vauxhall 2009 Corsa Owner'S Manual Download

Page: 130 / 211

Driving and operating

129

Unlock the fuel filler cap with the

ignition key, unscrew and remove.

The fuel filler cap can be retained in

the bracket on the fuel filler flap.

Caution

Wipe off any overflowing fuel

immediately.

Fuel filler cap

Only a genuine fuel filler cap provides

full functionality. Diesel-engined

vehicles have special fuel filler caps.

Fuel consumption - CO

Emissions

The determination of fuel

consumption is regulated by

European directive 80/1268/EEC

(latest edition 2004/3/EC).
The directive is oriented to actual

driving practices: Urban driving is

rated at approx.

and extra urban

driving with approx.

. Cold starts

and acceleration phases are also

taken into consideration.
The specification of CO

emission is

also a constituent of the directive.
The figures given must not be taken

as a guarantee for the actual fuel

consumption of a particular vehicle.

Furthermore, fuel consumption is

dependent on personal driving style

as well as road and traffic conditions.
All values are based on the EU base

model with standard equipment.
The calculation of fuel consumption

takes into account the vehicle's kerb

weight, ascertained in accordance

with the regulations. Optional

equipment may result in slightly

higher fuel consumption and CO

emission levels and a lower maximum

speed.
Fuel consumption, CO

emissions

190.

Summary of Contents for 2009 Corsa




















































































































































































































Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands

Vauxhall 2009 Corsa, Owner'S Manual

Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands