Vauxhall 2009 Corsa Owner'S Manual Download

Page: 109 / 211

108

Climate control

Cooling

In the Climate menu, select menu

item AC and activate or deactivate

cooling.
The air conditioning system cools and

dehumidifies (dries) when outside

temperature is above a specific level.

Therefore condensation may form

and drip from under the vehicle.
If no cooling or drying is required,

switch the cooling system off to save

fuel, Eco appears in the display.

Fan regulation in automatic mode

Fan regulation in automatic mode can

be adapted.

Select menu item Automatic blower

from the Climate menu and select the

desired fan regulation.

Manual air recirculation mode

The manual air recirculation mode is

operated with the

button.

Warning

The exchange of fresh air is

reduced in air recirculation mode.

In operation without cooling the air

humidity increases, so the

windows may mist up. The quality

of the passenger compartment air

deteriorates, which may cause the

vehicle occupants to feel drowsy.

Auxiliary heater

Air heater

Quickheat is an electric auxiliary air

heater which warms up the

passenger compartment more

quickly.

Coolant heater

Diesel-engined vehicles have a fuel-

powered auxiliary heater.

Summary of Contents for 2009 Corsa




















































































































































































































Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands

Vauxhall 2009 Corsa, Owner'S Manual

Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands