Vauxhall 2009 Corsa Owner'S Manual Download

Page: 42 / 211

Seats, restraints

The front airbag system is triggered in

the event of an accident of a certain

severity in the depicted area. The

ignition must be on.

The forward movement of the front

seat occupants is decelerated,

thereby considerably reducing the

risk of injury to the upper body and

head.

Warning

Optimum protection is only

provided when the seat is in the

proper position

34.

Keep the area in which the airbag

inflates clear of obstructions.
Fit the seat belt correctly and

engage securely. Only then the

airbag is able to protect.

Side airbag system

The side airbag system consists of an

airbag in each front seat backrest and

in the rear outboard seat backrests.

This can be identified by the word

AIRBAG.

The side airbag system is triggered in

the event of an accident of a certain

severity in the depicted area. The

ignition must be on.

Summary of Contents for 2009 Corsa




















































































































































































































Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands

Vauxhall 2009 Corsa, Owner'S Manual

Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands