Vauxhall 2009 Corsa Owner'S Manual Download

Page: 50 / 211

Seats, restraints

Isofix child restraint systems

Fasten vehicle-approved ISOFIX

child restraint systems to the

mounting brackets.
When using ISOFIX mounting

brackets for seat mounting,

universally approved child restraint

systems for ISOFIX may be used.
ISOFIX mounting brackets are

indicated by a label on the backrest.
Closely follow the installation

instructions accompanying the

ISOFIX child restraint system.

Top-tether child restraint

systems

Fasten Top-tether child restraint

systems to the fastening eyes on the

back of the rear seat and to the

passenger seat rail in the rear foot

well. The strap must run between the

two guide rods of the head restraint.

On the pillar trim of the rear roof and

on the attachment points are symbols

indicating the attachment eyes on

which to mount the child restraint

system.
When using Top-tether for seat

mounting, universally approved child

restraint systems for Top-tether may

be used.
Closely follow the installation

instructions accompanying the Top-

tether child restraint system.

Summary of Contents for 2009 Corsa




















































































































































































































Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands

Vauxhall 2009 Corsa, Owner'S Manual

Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands