Vauxhall 2009 Corsa Owner'S Manual Download

Page: 134 / 211

Driving and operating

133

Inserting the coupling ball bar

Insert the tensioned coupling ball bar

in the opening and push firmly

upwards until it audibly engages.
The rotary knob snaps back into its

original position resting against the

coupling ball bar without a gap.

Warning

Do not touch rotary knob during

insertion.

Green marking on the rotary knob is

visible.
Lock coupling ball bar and remove

key.

Eye for break-away stopping cable

Attach breakaway stopping cable to

eye.
Check that the coupling ball bar is

correctly installed

■ Green marking on rotary knob is

visible.

■ There must be no gap between the

rotary knob and the coupling ball

bar.

■ The coupling ball bar must be firmly

engaged in the opening.

■ The coupling ball bar must be

locked and the key removed.

Warning

Towing a trailer is permitted only

when a coupling ball bar is fitted

correctly. If the coupling ball bar

does not engage correctly, seek

the assistance of a workshop.

Summary of Contents for 2009 Corsa




















































































































































































































Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands

Vauxhall 2009 Corsa, Owner'S Manual

Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands