Vauxhall 2009 Corsa Owner'S Manual Download

Page: 65 / 211

Storage

Roof rack system

Roof rack

For safety reasons and to avoid

damage to the roof, the vehicle

approved roof rack system is

recommended.

Follow the installation instructions

and remove the roof rack when not in

use.

Fitting on model without sunroof

Push covers for concealing roof rack

mounts down and push backwards

with a valve cap key

158.

Fitting on model with sunroof

Disengage covers concealing roof

rack mounts by pushing sliders in

direction of arrow (e.g. with a coin)

and remove upwards. To close roof

rack mounts, first insert covers at

front and engage sliders at rear.
Attach roof rack at appropriate points,

see supplied roof rack system

instructions.

Loading information

■ Heavy objects in the load

compartment should be placed

against the seat backrests. Ensure

the backrests are securely

engaged. If objects can be stacked,

the heavier objects should be

placed at the bottom.

■ Secure objects with lashing straps

attached to lashing eyes.

■ Secure loose objects in load

compartment to prevent sliding.

Summary of Contents for 2009 Corsa




















































































































































































































Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands

Vauxhall 2009 Corsa, Owner'S Manual

Search results

Summary of Contents for 2009 Corsa

Reviews:

Related manuals for 2009 Corsa

Brands by name

Popular brands