Vatech PaX-i3D Smart User Manual Download Page 5

Page: 5 / 167

PaX-i3D Green (PHT-60CFO) User Manual

Notice

Notice

Thank you for purchasing the

PaX-i3D Green

extra-oral imaging system.

The

PaX-i3D Green

is an advanced digital dental diagnostic system that

incorporates PANO, CEPH, and 3D CT imaging capabilities into a single
system.

This manual describes how to operate the

PaX-i3D Green

system. It is

recommended that you thoroughly familiarize yourself with this manual in order
to make the most effective use of this equipment.

Observe all cautions, safety messages and warnings which appear in this
manual.

The

code linked to video file about image capture for the

PANO Standard

and

CEPH Lateral

is provided in the manual. The smart phone and pad which

have the QR code reader application program can be used to watch video.

Due to a constant technological improvement, the manual may not contain
the most updated information, subjecting to change without prior notice to the
persons concerned. For further information not covered in this manual, please
contact us at:

VATECH Co., Ltd.
Phone: +82-1588-9510
E-mail: [email protected]

This document is originally written in English.

The PaX-i3D Green

is referred to as Equipment in this manual.

Manual Name: PaX-i3D Green

(Model: PHT- 60CFO)

Version: 1.5.0
Publication Date: 2016-05

[PI3DG_130U_44A_en]User Guide.indd 5

2016-05-24 오후 4:18:20

Summary of Contents for PaX-i3D Smart








































































































































































Search results

Summary of Contents for PaX-i3D Smart

Reviews:

Related manuals for PaX-i3D Smart

Brands by name

Popular brands

Vatech PaX-i3D Smart, User Manual

Search results

Summary of Contents for PaX-i3D Smart

Reviews:

Related manuals for PaX-i3D Smart

Brands by name

Popular brands