Vatech Pax-i PCH-2500, Installation Manual

Page: 87 / 200

PaX-i
(PCH-2500) Installation Manual
87
5 Installing the Equipment: Wall Mount
Marking∙4∙locations∙on∙the∙floor∙and∙4∙on∙the∙wall
1. Move the equipment to the installation site as
close as possible.
2 . Adjust the distance between the wall and
equipment by moving it slightly, so that the
wall bracket touches the wall.
On the wall: 4 locations (right and left)
On the floor: 2 locations (rear)
3. Mark 4 anchor bolts locations on the wall and
2 (rear only) on the concrete floor.
On the floor: 2 locations (front)
4. Move the equipment aside to mark the other
2 locations on the floor(front).
Move the equipment aside a little farther from
the installer to make enough space to drill
the∙floor.
Variable
distance
Marking points