Vatech Pax-i PCH-2500, Installation Manual

Page: 161 / 200

PaX-i
(PCH-2500) Installation Manual
161
9 Installing Software
Verifying the status of the connection between the Crong board and PC
Note that it is perfectly normal to have the yellow exclamation mark
on a LAN network icon, even when a communication connection is
being established successfully.
1. Ensure PC and the equipment are connected through LAN cable.
2. Ensure the equipment is ON.
3. Start Task Manager from the desktop and click the Networking tab.
4.
Check that the link speed is 1 Gbps.
5. If not, it indicates that the connection is not established correctly.
To solve this problem, do take the following procedures.
5-1 Turn OFF both PC and the equipment.
5-2 Reboot PC system
5-3 Turn On the equipment and wait for 1 minute. Then consider the connection status again.
6. If solved. OK. Otherwise. Check the following.
6-1 Try with another LAN cable and check the connection points.
6-2 Replace the LAN card with one that VATECH recommends.