Vatech Pax-i PCH-2500, Installation Manual

Page: 158 / 200

PaX-i
(PCH-2500) Installation Manual
158
9 Installing Software
3.
Send the command in accordance with the command specification, as specified in the table above.
Here are some examples.
Default mode: 0002(beep) for each imaging mode.
When the same music announcement is desired for CEPH and PANO imaging modality
Enter the command
[SPM_MPOP_0001]
in the command field, followed by
Send
.
When the same beep announcement is desired for CEPH and PANO imaging modality
Enter the command [SPM_MPOP_0002] in the command field, followed by Send .
Finalizing the Parameters Settings
1. Click Exit∙→∙Save->Close button and terminate the control panel.
2. Exit the imaging program (main GUI): important!
3. Reset the equipment to take the changes into effect