background image

 

Notice 

EzRay Air Wall (VEX-S300W) User Manual 

Notice 

The 

EzRay Air Wall (VEX-S300W) 

is an intra-oral dental X-ray system. 

This manual contains descriptions, operating instructions, imaging procedures for the 

EzRay Air Wall (VEX-S300W) 

dental X-ray system. It is recommended that you 

thoroughly familiarize yourself with this manual to make the most effective use of this 

equipment. Read and understand all cautions, safety messages, and warnings in this 

manual. 

Always keep this manual with the equipment and review the operating procedures and 

safety instructions if needed. 

The illustrations/photos of the equipment in this manual are only for illustration 

purposes. The actual equipment may differ. 

Due to continuous technological improvements, the manual may not contain the most 

updated information. For further information not covered in this manual, please contact 

us at: 

Phone: 

(+82) 1588 9510

 

E-mail: 

[email protected]

 

This document is originally written in English. 

The 

EzRay Air Wall (VEX-S300W) 

is referred to as 

Equipment 

or

 System

 in this 

manual. 

 

Manual Name: EzRay Air Wall (Model: VEX-S300W) User Manual 

Document Number: VDH-UM-071 

Version: 1.38 

Publication Date: 2021-07 

 

Summary of Contents for EzRay Air Wall






















































































Reviews: