5.5.2. Secure Auditing
If you selected Secure Auditing on the first screen of the IDENTIKEY Authentication Server Setup Wizard, you will
see the
Secure Auditing
screen:
Image 21: IDENTIKEY Authentication Server Setup Wizard – Secure Auditing
n
Epoch Length in Lines
: the epoch will end after the specified number of lines has been written to the
secure audit data store.
n
Epoch Length in Seconds
: the epoch will end after the specified time (in seconds) has elapsed.
Secure Auditing setup will be different depending on whether or not you have any HSM enabled. If you have an
HSM enabled, encryption settings will be stored on that HSM (see
13.3. Secure Auditing With Hardware Security
).
If HSM-support is not enabled, then you will need to configure a secure auditing keypair. If you choose
Install my
own keypair
, you will need to upload this file in the
PEM
format to IDENTIKEY Appliance afterwards. You will also
be asked to provide this
PEM
file's matching master audit keystore passphrase.
5. First Time Configuration
IDENTIKEY Appliance 3.11.12 - Installation and Maintenance Guide
36
