13.2.5. Replicating to Required Slots
If you are using multiple Hardware Security Modules with IDENTIKEY Appliance, the storage and sensitive data keys
created must be replicated to the other HSMs. This process must be performed each time a key change occurs and
consistency among HSMs is required.
The exact steps for this procedure will depend on attributes specific to your HSM setup. For more information, refer
to the
ProtectToolkit C Administration Manual
, Section "Trust Management" and Section "Token Replication".
The
ProtectToolkit C Administration Manual
is included in your SafeNet HSM documentation suite, and is typically
named
ptk_c_administration_manual_rev-c.pdf
.
13.3. Secure Auditing With Hardware Security Modules
To enable Secure Auditing for HSM, a Master Audit Keypair will have to be created on the HSM. This must be per-
formed before configuring IDENTIKEY Appliance for Secure Auditing.
The public key from the Master Audit Keypair must be exported from the HSM to allow its use in verification.
13. Hardware Security Module
IDENTIKEY Appliance 3.11.12 - Installation and Maintenance Guide
79
