System Actions
Tip:
Reboot and shut down buttons are also provided on the
IDENTIKEY Appliance Configuration
Tool
Status screen.
7.3
Rescue Default Administrator Users
Administrator Users for both the IDENTIKEY Appliance Configuration Tool and IDENTIKEY Authentication Server
can be reset in the IDENTIKEY Appliance Configuration Tool.
To rescue the IDENTIKEY Appliance Configuration Tool sysadmin User:
1.
In the IDENTIKEY Appliance Configuration Tool, navigate to
System > Actions
.
2.
Click on the
Rescue Sysadmin User
button, which automatically enables the sysadmin user and prompts
you to enter a new password for the sysadmin user. A new login to the IDENTIKEY Appliance Configuration
Tool is not required to change the password. See also section
information.
To rescue the IDENTIKEY Authentication Server Administration Web Interface Administrative
User:
Rescue the administrative user of the Master Domain created during the IDENTIKEY Authentication Server Setup
Wizard.
1.
In the IDENTIKEY Appliance Configuration Tool, navigate to
System > Actions
.
2.
Click on the
Rescue IDENTIKEY admin User
button. The IDENTIKEY Appliance Configuration Tool will then
request a Username and Password to be used for the reset. There are three possible outcomes of this
operation:
a.
If the Username provided is identical to the one provided during the IDENTIKEY Authentication Server
Setup Wizard, then the Administrative User will be reset, and you will be prompted to enter a new
password.
b.
If the Username does not exist on the Master Domain, then a new DIGIPASS User Account will be
created with the provided credentials. This User Account will have the same access rights as one
created via the IDENTIKEY Authentication Server Setup Wizard.
c.
If the Username already exists in the Master Domain, then that Username's corresponding User
Account will be upgraded to an Administrator Account. Its password will also be changed to the one
you provided.
In addition to these, outcomes, the IDENTIKEY Appliance Configuration Tool will also perform the following on
the “rescued” User Account:
a.
Unlock the User Account if locked
b.
Enable the User Account if disabled
c.
Unassign any DIGIPASS records assigned to the User Account
IDENTIKEY Appliance Installation and Maintenance
66
