Rescue Tool
Note
The Default Gateway can also be modified in a similar way through the Rescue Tool.
6.7
Ping an IP Address or Hostname
You can ping a system in order to test whether it can connect to IDENTIKEY Appliance. To ping an IP Address:
1.
Type
n
for network menu.
2.
Type
p
to enter the Ping menu.
3.
Enter the IP address or hostname of the system you want to ping.
The Rescue Tool will then ping the supplied IP address/hostname.
6.8
Reset the sysadmin User
To reset the sysadmin user, change the password for this user. For more information on how to change the
password, refer to section
. The new password will be asked immediately, a new login to
the IDENTIKEY Appliance Configuration Tool is not required to change the password.
The sysadmin user will be reset with the same result as described in section
6.9
Reset the access settings to the Configuration Tool
To reset the access settings to the Configuration Tool:
1.
Type
r
to access the reset options
2.
Type
c
to reset the access settings
3.
Type
y
for yes to confirm
Any IP addresses specified with the
Limit Access to Networks
setting are cleared, effectively allowing access to the
Configuration Tool from any client computer.
IDENTIKEY Appliance Installation and Maintenance
64
