First-time Configuration
Keep in mind that you cannot disable/enable Hardware Security Module and Secure Auditing settings after
completing this wizard. To do so, you will need to perform a factory default.
5.5.2
Secure Auditing
1.
If you selected Secure Auditing on the first screen of the IDENTIKEY Authentication Server Setup Wizard,
you will see the Secure Auditing screen.
a.
Epoch length in lines: the epoch will end after the specified number of lines has been written to the
secure audit data store.
b.
Epoch Length in seconds: the epoch will end after the specified time (in seconds) has elapsed.
Secure Auditing setup will be different depending on whether or not you have HSM enabled. If you have HSM
enabled, encryption settings will be stored on HSM; refer to
2.
If HSM is not enabled, then you will need to configure a Secure Auditing keypair.
If you choose
Install my own keypair
, you will need to upload this file in the PEM format to IDENTIKEY
Appliance afterwards. You will also be asked to provide this PEM file's matching Master Audit Keystore
Passphrase.
IDENTIKEY Appliance Installation and Maintenance
50
Image 31: IDENTIKEY Authentication Server Setup Wizard: Secure Auditing
