Varta Pulse neo Series Operating Manual Download Page 103

Page: 103 / 148

Servicing

103

11.4.5.

Installing and removing the battery
module

Make sure that the battery module is
deactivated and that no LED
indicators are flashing.

WARNING

Improper handling of the battery
module.

Personal injury and property damage.

Make sure that the battery module is
not damaged during removal or
installation.

Do not try to repair it.

Battery modules are maintenance-free
and must not be opened.

Any work described in this chapter
must be carried out by 2 persons or
with suitable equipment.

Do not lift the battery module at the
handle.

When installing the battery module,
guide it with the handle.

Summary of Contents for Pulse neo Series





















































































































































Search results

Summary of Contents for Pulse neo Series

Reviews:

Related manuals for Pulse neo Series

Brands by name

Popular brands

Varta Pulse neo Series, Operating Manual

Search results

Summary of Contents for Pulse neo Series

Reviews:

Related manuals for Pulse neo Series

Brands by name

Popular brands