Varta Pulse neo Series, Operating Manual

Page: 108 / 148

Servicing
108
If all points are complied with:
„ Lift the hood over the mounting plate
at an angle of 45°.
„ Carefully lower the hood until the rear
is engaged at the mounting plate.
„ Connect the PE conductor between
the hood and battery inverter.
„ Check the electrical connection
between hood and central earthing
point by continuity testing.
„ Swivel the hood to the device.
Observe the position of the
ON/OFF switch.
Make sure that no lines are
jammed!
„ The spring must click into place!
„ Close the energy storage system with
the three included screws at the
bottom.
Checking the PE connection