Varta Pulse neo Series, Operating Manual

Page: 90 / 148

Installation
90
10.9.3. Battery module registration
In the second step, the serial number of
the battery module must be entered. It can
be found on the ID label of battery
module.
„ Afterwards, select "Continue".
10.9.4. Grid parameter configuration
For configuration of grid parameters,
select the respective standard in the
"Country code" drop-down menu.
Check the values and adjust them as
necessary to the requirements of the local
grid operator.
„ Afterwards, select "Continue".
10.9.5. Function test
To start the automatic status check, select
"Start".
Please note: This may take a few
minutes.
If everything is in order, a green
checkmark is displayed.
Failed tests are indicated by a red cross.
„ Please restart the function test.
If the test fails again:
„ Make sure that the cabling is correct.
„ Switch off the energy storage system.
The entered data is saved.