Varimixer ERGO100, Operating Instructions Manual

Page: 20 / 24

20
A
B
C
D
l
ubrICatIon oVerVIew
:
Part Location Oil/grease Explanation Frequency
Bushings
in the
bowl arms Item A,
Fig.6
Organic oil or grease,
e.g
Texaco StartPlex EP
Remove the back cover.
Lubricate the bowl arm axle with
grease.
Per 5,000 batches or min.
once yearly or in case of
unusual noise.
Lifting
guide Item
B,
Fig.6
Organic oil or grease,
e.g
Texaco StartPlex EP
Remove the back cover.
Lubricate the bearing and track with
grease.
Mixer head Item
C,
Fig.6
Gearwheel and sp-
rocket
Molub Alloy
036SF Heavy or Ca-
strol Grippa 355.
Needle bearings
should not be lubricated
with this type of lubri-
cant.
.
The mixer head may only be re-
paired by an authorised technician. During repairs
Lifting
actuator
AK00131
Item D,
Fig.6
Always use spindle
grease: Mobilith SHC
460 from Mobil
.
The gear of the actuator is lubri-
cated for life and does not need to be
serviced.
The spindle and the spindle nut in
the actual actuator
(Fig 6a) are not
lubricated for life and therefore need
relubricating. The actuator is thor-
oughly lubricated on delivery.
Follow the instructions for relubri-
cating the spindle nut
As a minimum after 1,000
lifts/lowerings (of bowl) or
in case of unusual noises
or vibrations.
The spindle nut
“screams” if there is in-
sufficient lubrication.
It is important to keep the
spindle well lubricated be-
cause this is important for
the lifespan of the nut.
Grease nipple
Fig. 6 Lubrication overview
Grease nippel
for spindel nut