8
o
PeratIon
of
the
mIxer
:
Before starting the mixer:
Mount the required tool in the bayonet shaft. Place the bowl
in the bowl arms and close the safety guard.
To raise the bowl, activate the fields
,
and
simultaneously
, the activation to be continued until the
bowl has reached its top position. When the bowl is ap-
prox. 20 cm from its top position, the tool will start to ro-
tate in low speed. The rotation of the tool and the bowl will
stop automatically when the bowl is in its top position.
The red diode in the field
is now alight to show that
the mixer is ready.
Start the mixer:
Activate the field
to start the mixer.
Activate the field
to increase the speed.
Activate the field
to reduce the speed.
The speed indicator below the fields
to
shows the
mixing speed of the tool.
Four fixed speeds:
For quick choice of speed, use the fields
to
.
Field
corresponds lowest speed.
Field
corresponds approx. 30% of maximum speed.
Field
corresponds approx. 60% of maximum speed.
Field
corresponds maximum speed.
Indication of operation time:
Before starting the mixer, an operation time for the mixer
can be chosen by adjusting the time on
and
.
If the field is activated for longer time, the speed is in
-
creased/reduced quicker.
Minutes and seconds are shown in the text field between
and
.
Automatic lowering of bowl:
Once the mixer has been started, the operator can make the
mixer lower the bowl automatically when it stops by pressing
.
The diode in the field is flashing after the activation.
Inspection of the ingredients during operation:
If it is wished to stop the mixer without affecting the operation
time, the field
can be activated. The mixer will reduce
speed and then stop, the operation time will also stop.
If the guard is opened, the display shows
, but the op-
eration time is displayed again when the guard is closed.
Close the safety guard and press
and the mixer will
start at the lowest speed. The operation time continues
from before.
Lowering of bowl:
When the ingredients in the bowl have been mixed, the mixer
is stopped by activating the field
.The bowl is lowered
by activating the field
. When the bowl has reached its
bottom position, the safety guard can be opened.
Emergency stop
Bowl up
Bowl down
Pause
Time up
Text field
Time down
Fixed speeds
Speed indicator
Speed down
Speed up
Start/Stop
REMIX
Summary of Contents for ERGO100
Page 14: ...14 Electrical components...
Page 15: ...15 Safety circuit...
