ProStar 430 Autosampler Control Manual
- 34 -
03-914947-33:2
Click on the
button to move the plate to the
operating position again.
Click on the
button to fill the syringe with
wash solvent.
Click on the
button to dispense the syringe
contents to syringe waste and to move the syringe to standard
operating position again.
Click on the
button to move the syringe to end
position if the syringe needle is to be replaced.
Click on the
button to move the syringe to
standard operating position again.
Click on the
button to start a standard wash
procedure. All tubing connected to the syringe valve will be
filled and rinsed with wash solvent.
Solvent selector valve parameter group:
Click on the valve position number to select the corresponding
solvent stream to be used.
Integrated stream switching parameter group:
If this option is installed, select the position (1-6 or 1-2) of the
high pressure ISS valve to be used.
