ProStar 430 Autosampler Control Manual
- 20 -
03-914947-33:2
The following parameters can be programmed:
If this option has been previously configured in the Galaxie
Configuration Manager, select from the
ISV-A
list, the position
of the high pressure ISS valve to be used.
If this option has been previously configured in the Galaxie
Configuration Manager, select from the
SSV
list, the solvent
stream to be used at a specified time.
Program the activation of the four available auxiliary relays
(
Aux 1…4
).
Program the hexadecimal state value of the 4 bits binary output
from the
P3 Out
connector (range: 0 to 9 and A to F).
Select
Automatic end time
to stop the program at the end of the
time table or
Manual end time
to define manually the end time
of the events program. If the end time exceeds the
programmed analysis time, this end time overrules the run time
and the next injection will be started as soon as the timed
events program has finished.
