ProStar 430 Autosampler Control Manual
- 26 -
03-914947-33:2
Dispense to Sample, Waste, Destination, Reagent A…D or
Wash a programmed volume (
Amount
) from the buffer tubing.
In this case, it is not possible to dispense a larger volume than
the volume aspirated in previous actions.
Speed
and
Height
can be programmed.
NOTE:
Refer to the
Appendix
to find the
Syringe Speed
values depending on the type of
syringe.
Wait to program a pause (from 0 to 599.99 minutes). During the
pause, the needle will move to home position (if the previous
step is an Aspirate from or a Dispense to action). To keep the
needle in the same position, an Aspirate from or a Dispense to
step of 0 µL must be programmed at the desired position.
Repeat the X entered last
Step
(s). The
Count
parameter
defines how many times the
Step
(s) must be repeated.
Rinse+Wash a programmed needle volume (
Amount
). Buffer is
rinse to waste.
Injector valve programs the positions (Inject or Load) of the
high pressure injection valve.
Syringe valve controls the connections of the syringe to one of
its three tubes (Needle: connection to sample needle, Wash:
connection to wash solvent bottle and Waste: connection to
syringe waste tubing).
Solvent valve programs the positions (from 1 to 6) of the high
pressure Solvent Selection Valve.
Stream valve programs the positions (1-6 or 1-2) of the high
pressure ISS valve.
