Van's Aircraft RV-12, Maintenance Manual

Page: 121 / 217

Rev. 6
9-5
GENERAL
C
OMPONENT REPLACEMENT
See 9-2 and 9-3.
C
OMPONENT
R
EMOVAL BY CUSTOMER
Using the KAI as a guide, customers are authorized to remove a screen or any electrical
component that is to be sent in for service.
P
ITOT AND STATIC SYSTEM COMPONENT REPLACEMENT
Tools Razor Knife
Expendable Plastic tie wraps
Replaceable Connector
Tubing
Service Rating Line
Minimum Certification LSA-RM or A&P
Additional References KAI
R
EMOVAL
1. Make note of routing, location and orientation of the component to replace.
2. Remove the failing component.
I
NSTALLATION
1. Install a new component of equivalent properties and secure with plastic tie
wraps.
2. Complete the pitot /static check as outlined in the RV-12 production acceptance
test document.
L
IGHT REPLACEMENT
▲ WARNING: B
EFORE PERFORMING ANY MAINTENANCE OR REPAIRS TURN THE MASTER
SWITCH
'
OFF
'
AND DISCONNECT THE NEGATIVE
(-)
BATTERY CABLE FROM THE BATTERY
.
Tools Wire cutter
Wire terminal crimper
Needle nose pliers
#2 Phillips screwdriver
Expendable Wire terminals
Replaceable Light Module
Service Rating Preventative
Minimum Certification Owner and SPC, LSA-RM or A&P
Additional References KAI