Van's Aircraft RV-12, Maintenance Manual

Page: 81 / 217

Rev. 6
5-25
SERVICE SCHEDULE PROCEDURES
W
ING ATTACH LOCATION LUBRICATION
(
WINGS REMOVED
)
Tools None
Expendable Wheel bearing grease
Anti-seize compound
Replaceable Fuselage Pin
Service Rating Preventative
Minimum Certification Owner and SPC, LSA-RM, or A&P
Additional References KAI
F
USELAGE PINS
1. Wipe clean, the fuselage pins (2).
2. Wipe clean, the wing retention pin bushings (8).
3. Apply grease lubricant sparingly to the shaft of each fuselage pin.
S
TUB SPAR AND
R
EAR SPAR
1. Wipe clean, the inboard end of the stub spar and rear spar of each wing. (5-4)
2. Apply anti-seize compound sparingly to the inboard end of the stub spar and rear
spar of each wing.
F
LAPERON CONTROL CONNECTION LUBRICATION
(
WINGS REMOVED
)
Tools None
Expendable Wheel bearing grease
Replaceable None
Service Rating Preventative
Minimum Certification Owner and SPC, LSA-RM, or A&P
Additional References KAI
Wing removal (5-13)
1. Wipe clean, the UHMW pivot guide and actuation bracket of each flaperon. See
page 5-4
,
Figure 10
.
2. Apply lubricant sparingly to the UHMW pivot guide and actuation bracket of each
flaperon.