11
162
Fig. 8
#1
3. Lubricate parts with engine oil. Assemble #2
piston and connecting rod,
Fig. 9
.
•
Arrow, notch or casting mark on piston must
face flywheel side.
•
The designation “OUT 2” or the number ‘‘2”
on the connecting rod must face PTO side
(opposite arrow on piston).
4. Install piston pin locks with needle nose pliers.
Fig. 9
#2
Assemble Piston Rings to Piston
Install rings in order shown,
Fig. 10
. Use Piston Ring
Expander,
#19340
when installing center (2) and top
(1) compression rings.
1. Install oil ring expander (4).
a. Install lower scraper ring (5).
b. Install upper scraper ring (3).
2. Install center compression ring (2) with ID mark
(6) up.
3. Install top compression ring (1) with ID mark
(6) up.
Fig. 10
ÔÔÔÔ
ÔÔÔÔ
ÔÔÔÔ
ÔÔÔÔ
ÔÔÔÔ
ÔÔÔÔ
Ö
Ö
