3
LOCKED FOR PRINTING – SELECT SECT. NEEDED >
71
Fig. 13
Remove Flywheel
Flywheel Nut – Models 290000, 303000, 540000,
610000
1. Prevent the flywheel from turning with Flywheel
Strap Wrench, #
19433
(5) around outer rim of fly-
wheel,
Fig. 14
.
2. Turn the flywheel nut COUNTERCLOCKWISE
(arrow) with a 1/2” breaker bar (4) and a 30 mm
socket to remove.
Fig. 14
Models 350000, 380000
1. Place Flywheel Holder #
19321
(6) on fan
retainer with lugs of flywheel holder engaging
slots on the fan retainer,
Fig. 15
.
NOTE:
If engine is equipped with rewind starter hub
remove starter hub screw first. Then remove
flywheel nut.
2. Turn the flywheel nut COUNTERCLOCKWISE
(arrow) with a 1/2” breaker bar (4) and a 30 mm
socket to remove
NOTE:
Do not remove fan retainer and fan at
this time.
Fig. 15
Flywheel – All Models EXCEPT Engines with
PowerLink
t
NOTE:
See the special procedure at the end of this
section for flywheel removal on engines with
the PowerLink
t
system.
1. Reinstall flywheel nut (2). Turn nut down flush
with top of threads,
Fig.
16
.
2. Install Flywheel Puller #
19203
(1).
3. Tighten puller screws equally until flywheel
loosens.
CAUTION
•
DO NOT strike the flywheel with a hard
object or a metal tool. This could cause the
flywheel to shatter in operation.
•
Use approved flywheel removal tools.
AVOID INJURY!
Fig.
16
