4
106
Fig. 118
7. Remove cover plate (10). Discard gasket (11),
Fig. 119
.
Fig. 119
11
8. Remove screws and choke plate (12),
Fig. 120
.
9. Remove choke shaft. Discard seal (13).
Fig. 120
13
12
10. Remove nozzle body (14),
Fig. 121
. Discard
gasket (15).
Fig. 121
15
14
11. Mark throttle plates (16),
Fig. 122
, before
removal so they will be re-installed in the original
position. Sides of throttle plate are beveled.
Fig. 122
17
16
12. Remove screws, throttle plates and throttle shaft
with seal. Discard seal (17).
This completes the carburetor disassembly
procedure.
Clean Carburetor
1. Disassemble carburetor.
2. Remove and discard all old gaskets, seals and
sealing material.
AVOID INJURY!
•
Wear suitable protection when using cleaners.
Follow instructions on container.
CAUTION
3. Use a commercial carburetor cleaner (such as
Briggs & Stratton Spray Cleaner,
#100041
or
100042
) to clean carburetor parts and body.
