Vanderbilt CFMW3025, Configuration Manual

Page: 43 / 72

Configuration
© Vanderbilt 2016 43
NOTICE
Acoustic detection and destroy detection must insert SD card. With no SD card
insert, the two detection functions are unavailable and cannot be selected in the
conditions of FTP Recording, E-mail Recording and NAS Recording.
Alarm output
1.
Alarm mode:
The alarm output can be activated when any of the following events oc-
curs:
–
B/W: when the image changes to monochrome.
–
Event: When alarm input 1, alarm input 2 or alarm input 3 or motion is
triggered, the alarm output will reflect this immediately as well.
2. Output hold time:
Set a time to hold the alarm output. You can select 0, 5, 10, 15, or 30 sec-
onds. This function is used when a siren, buzzer or emergency light is
connected.
9.4.2 Audio event upload
Select an audio event. Upload the *.wav file as a voice alarm message to the
SD card or a PC. Up to 10 audio events can be selected. Alarm input 1 and
motion setting will show different effects depending on which audio event you
selected.
NOTICE
The audio event only accepts *.wav file and the audio time have to be in 5 secs.