Vanderbilt CFMW3025, Configuration Manual

Page: 16 / 72

Installing the camera
© Vanderbilt 2016 16
image. See Section 6.5.
1.
Start "Webcam IP Manager" and click "Search".
2. Check whether the camera name "nwcam05" is displayed in the cam-
era list.
3. Click "nwcam05" to select the camera.
The camera name, IP address and HTTP port number are displayed in
the "Network Camera Lists" field.
4. Double-click the camera you wish to log in to in the camera list.
The screen for entering the user name and password will appear.
5. Enter the administrator log-in ID and password. See "Login dialog".
A camera image screen of the network camera will appear.
To view images without using "Webcam IP Manager," launch the Internet
browser, enter URL http://192.168.0.10/ in the address box and press "EN-
TER."
It takes about 10 seconds to activate the camera.
If a port number other than "80" is set, enter the port number after ":" as in
http://192.168.0.10:88.
8.5 Using the camera search application "Webcam IP Manager"
The "Webcam IP Manager" is an application for searching for network cameras
that can currently be viewed from the administrator's personal computer or a
user's personal computer.
Setting up "Webcam IP Manager"
1.
Insert the CD in the CD-ROM drive of the personal computer.
2. Double-click the "ipfinder.Setup" file in the CD-ROM and install
"Webcam IP Manager" in accordance with the instructions on the screen.
IMPORTANT
"Webcam IP Manager" is compatible only with Windows Vista, Windows XP
and Win7. Glitches may occur on your personal computer if it is run with an-
other operating system. Do not install "Webcam IP Manager" with other operat-
ing systems.
Using "Webcam IP Manager" to search for a camera
Set the personal computer to "Administrator authorization" when using
"Webcam IP Manager".
1. Select "Start" > "Programs" > "Webcam IP-Finder".