11
FAS-402-CH/FAS-602-CH Series Operating Instructions Ver. 1.05E
Caution
Use machine properly
Read the operating instructions carefully and operate sealer correctly.
Accidents or damage caused by misuse of the machine not in
accordance with the operating instructions are the sole responsibility of
the customer.
Caution
Printer outlet
The printer outlet is located on the top of the machine frame cover.
It is to be used ONLY when mounting the optional printer (FEP-V-N2).
Do NOT attempt to plug any other electronic devices into this outlet.
Heating temperature should be set at a minimum
Set sealer so that an acceptable seal is completed at the lowest heating
temperature. Excessively high heating temperatures will damage the
fluoro glass sheet, glass tape and other consumables, as well as result in
heating element breakage. This will lead to decreased work productivity
and unnecessary power consumption.
Allow sufficient cooling
With an impulse type sealer, residual heat after the heating cycle has
been completed is dispersed through the pressure lever and machine
frame, allowing the film to set under pressure. Setting the cooling
temperature excessively low will reduce the work efficiency.
Be sure to allow sufficient cooling for each seal cycle.
For smooth operation