43
FAS-402-CH/FAS-602-CH Series Operating Instructions Ver. 1.05E
[Replace when] When the fluoro glass sheet breaks,
burns, or when the seal becomes
messy, etc.
[Essential tools] Scissors
1
Loose the four plastic nuts (white) securing the
fluoro glass sheet holder and sponge holder.
2
Turn the fluoro glass sheet roll bar. Wind the
damaged fluoro glass sheet either forward or
backward for about 15mm.
3
When the fluoro glass sheet is loosen, hold the
fluoro glass sheet roll bar and fasten the plastic
nuts to fix the fluoro glass sheet holder and
sponges holder.
When the fluoro glass sheet is sticking to the
heater wire, peel it off before winding. 25 to
30cm of fluoro glass sheet is wound for a
space, if the sheet remain a little or consumed,
refer "changing the fluoro glass sheet" to
change the fluoro glass sheet.
1
Loosen the plastic nuts (white) that secure the
fluoro glass sheet holder and sponge holder.
2
Remove the fluoro glass sheet holder and
sponge holder. Then remove the damaged
fluoro glass sheet from the fluoro glass sheet
roll bar.
3
Attach the new fluoro glass sheet using the
Scotch tape to the fluoro glass sheet roll bar.
4
Install the fluoro glass sheet roll bar between
the sponge holder and fluoro glass sheet holder,
and temporary tighten the four plastic nuts
(white).
5
Turn the fluoro glass sheet roll bar so the fluoro
glass sheet will not be wrinkled at the seal area.
6
Securely fasten the plastic nuts (white) to fix
the fluoro glass sheet roll bar with the fluoro
glass sheet holder.
[Replace when] When the fluoro glass sheet breaks,
burns, or when the seal becomes
messy, etc.
[Essential tools] Scissors, Scotch tape
9-2 Replace a fluoro glass sheet
9-1 Slide a lower fluoro glass sheet
Fluoro glass sheet holder
Fluoro glass sheet holder
Sponge holder
Plastic nut (white)
Fluoro glass sheet
roll bar
Plastic nut (white)
Sponge holder
Fluoro glass sheet
roll bar
Fluoro glass sheet
roll bar
Fluoro glass sheet
Scotch tape
Fluoro glass sheet holder spring