56
56
FAS-402-CH/ FAS-602-CH Series Operating Instructions Ver. 1.05E
For longer the sealer life and normally operation, it is necessary to check and maintain the sealer regularly.
Please perform the checking and maintenance on time after purchased the sealer.
Checking items for every day
Seal area
9HULI\WKDWÀXRURJODVVVKHHWDQGVLOLFRQHUXEEHUDUHQRWGLUW\RUGDPDJHG
$LU¿OWHU
5HPRYHWKH¿OWHUFXSDQGFOHDQLW5HIQH[WSDJH
Checking items for every week
Fluoro glass sheet
,ILWLVGDPDJHGRUFRORULVFKDQJHGVOLGHWKHÀXRURJODVVVKHHWRUUHSODFHZLWKQHZRQH
Heating element
If it is damaged or color is changed, replace with new one.
$LU¿OWHUHOHPHQW
,ILWLVGLUW\FOHDQE\ÀRZLQJDLU
'U\¿OWHU
,ILWLVGLUW\FOHDQWKHFORJJLQJ5HIUHODWHGLQVWUXFWLRQ
Checking item for every month
Glass tape
If it is damaged or color is changed, replace with new one.
Sarcon sheet
If it is not damaged or color is changed,replace with new one.
Vacuum tube section
Verify that there is no any foreign object in joint and horse.
Checking items per year
Silicone rubber
If it is not burned or damaged, replace with new one.
Relief valve
Verify the initial pressure setting is 310~330kPa. If not so, adjust it.
Cylinder
Verify the cylinder action is smooth. Otherwise, replace it.
Valve
Verify the valve action is smooth. Otherwise, replace it.
Temperature sensor *1 Verify the sensor’s tape color is not changed.
Checking main parts every three years
Air parts
&\OLQGHU9DOYH$LUWXEH$LU¿OWHU5HOLHIYDOYH6SHHGFRQWUROYDOYH
Electric parts
SSR-03 relay, circuit beaker, electrode
*1 Temperature which sensor recognize is adjusted to the actual heating temperature at the shipment from our
factory. But the error may occur for long time use, so please check it.
Ref. "Replacing the routine maintenance parts in page 42
12 Regular check and maintenance
12-1 Regular check
